A suspension or physique modification designed to extend the journey top and floor clearance of a selected mannequin yr compact pickup truck. These kits usually embody elements comparable to taller springs, modified shocks, and typically physique spacers to boost the automobile’s body relative to the axles and wheels. For instance, putting in this modification permits for the fitment of bigger tires or offers improved off-road functionality.
The appliance of such a modification to a automobile from this mannequin yr can supply a number of benefits. These embody enhanced aesthetics, the power to traverse tough terrain extra simply, and an improved vantage level for the driving force. Traditionally, these modifications gained recognition as a result of elevated demand for personalized autos and the need for enhanced off-road efficiency capabilities in shopper vans.
The next data will discover the varied varieties accessible, set up issues, potential impacts on automobile dealing with and security, and essential points to contemplate earlier than endeavor such a modification to a automobile from this manufacturing yr.
1. Suspension Geometry
The story of a pickup truck and its altered stance begins not with brute power, however with exact angles and calculated curves. The suspension geometry, the intricate community of angles and distances governing the wheel’s motion, is irrevocably modified when a elevate is launched. Understanding this transformation is paramount to a protected and efficient modification, turning a possible peril right into a realized enchancment.
-
Roll Middle Migration
Lifting a 1999 Ford Ranger usually causes the roll heart, an imaginary level round which the physique rolls throughout cornering, to shift. This shift impacts dealing with; the next roll heart can result in elevated physique roll and probably destabilize the automobile, significantly throughout emergency maneuvers. Corrective measures, comparable to adjustable management arms, could also be essential to mitigate these results and keep predictable dealing with.
-
Camber Angle Alteration
The camber angle, the inward or outward tilt of the tire relative to the vertical axis, is considerably affected by a suspension elevate. Optimistic camber, the place the highest of the tire tilts outward, can lead to uneven tire put on on the inside edges. Conversely, destructive camber could cause put on on the outer edges. Adjustable ball joints or camber plates is likely to be required to realign the camber inside manufacturing unit specs, maximizing tire life and optimizing dealing with.
-
Toe Angle Misalignment
Lifting the Ranger additionally impacts the toe angle, the course during which the tires level relative to one another. Incorrect toe settings could cause speedy tire put on and instability at freeway speeds. An alignment is completely essential after putting in a elevate, making certain the toe is correctly adjusted to compensate for the altered suspension geometry. Failure to take action can dramatically shorten tire lifespan and compromise automobile security.
-
Driveline Vibration Introduction
Altering the journey top shifts the angle of the driveshaft, and that is what transfers energy to the wheels. This transformation could cause vibrations, a transparent signal of stress. The vibrations may be as a result of elevated angles on the u-joints (common joints). To mitigate this, an extended driveshaft or a service bearing drop equipment is likely to be wanted to keep up acceptable driveline angles.
These interconnected sides of suspension geometry spotlight the complexity concerned in modifying a 1999 Ford Ranger with a elevate. It isn’t merely about elevating the automobile; it is about understanding and managing the implications of that change to make sure the continued security, efficiency, and longevity of the automobile. The geometry impacts the standard of the drive, the lifespan of your tires, and the security of the automobile.
2. Tire Clearance
The story of a raised ’99 Ranger usually hinges on a seemingly easy idea: area. Tire clearance, the gap between the tire and surrounding automobile elements, dictates the dimensions of the rubber that may be safely accommodated. With out satisfactory clearance, bigger tires, a standard motivation for putting in a elevate, change into a legal responsibility, not an asset. They will rub towards the wheel wells, body, or suspension elements, main to wreck, compromised dealing with, and even harmful driving situations. A elevate equipment’s success is, in some ways, measured by its capability to supply this important area.
Think about a Ranger proprietor who, pushed by the need for a extra aggressive stance, installs a elevate with out meticulously calculating tire clearance. The speedy consequence is the grating sound of tire towards metallic throughout turns, a relentless reminder of misjudgment. This rubbing not solely damages the tires, shortening their lifespan, but additionally wears away on the wheel wells, probably resulting in rust and structural weaknesses. Extra critically, it impacts the automobile’s steering, creating unpredictable dealing with, particularly throughout emergency maneuvers. This cautionary story illustrates the direct and sometimes unforgiving relationship between tire clearance and automobile security. Due to this fact, elevate kits supply satisfactory tire clearance so this won’t happen.
Finally, tire clearance is greater than only a quantity; it’s a defining issue within the efficiency and security of a lifted ’99 Ranger. Correct calculation and consideration are very important elements of the modification course of. Guaranteeing enough clearance prevents harm, maintains dealing with, and permits the truck to realize its meant goal. That is particularly essential to stop any additional harm to the automobile and to maximise its use.
3. Driveline Angles
The saga of modifying a 1999 Ford Ranger usually includes a hidden protagonist: driveline angles. These angles, shaped by the intersection of the driveshaft and the transmission/differential, are usually inconspicuous, silently transmitting energy from the engine to the wheels. Nevertheless, introducing a elevate equipment dramatically alters this equilibrium, turning these beforehand benign angles into a possible supply of serious mechanical misery. A considerable alteration in journey top with out addressing these angles can precipitate untimely put on, vibration, and, in excessive situations, full driveline failure. The driveline angles are significantly essential part when take into account a elevate equipment.
Think about the situation of a Ranger proprietor who, keen to boost his truck’s off-road prowess, installs a elevate with out contemplating the following modifications to the driveline. Initially, the elevated floor clearance is widely known. Nevertheless, refined vibrations start to manifest at freeway speeds, rising progressively worse over time. Ignoring these warning indicators, the proprietor continues to drive the truck, ultimately resulting in a catastrophic U-joint failure, stranding him miles from civilization. This anecdote underscores the important significance of understanding and mitigating the affect of altered driveline angles. Set up of a elevate equipment impacts the angle of the driveline.
In essence, understanding driveline angles is just not merely a technicality; it’s a prerequisite for making certain the longevity and reliability of a lifted 1999 Ford Ranger. Addressing these angles by means of acceptable modifications, comparable to putting in a service bearing drop equipment or a double cardan joint, is important for sustaining easy energy supply and stopping pricey mechanical failures. Ignoring these issues transforms a seemingly helpful improve right into a ticking time bomb, threatening the automobile’s efficiency and the proprietor’s security. The failure to handle this can lead to the discount of the standard of the driveshaft, and enhance the wear and tear of the engine.
4. Brake Line Size
The story of modifying a ’99 Ford Ranger usually overlooks an important element: the standard brake line. These versatile conduits, answerable for transmitting hydraulic stress to the calipers, are simply forgotten within the pursuit of elevated floor clearance. Nevertheless, putting in a elevate equipment stretches these traces past their unique design, making a probably catastrophic state of affairs. The integrity of the braking system, the very basis of car security, hinges on the adequacy of brake line size after a suspension modification.
-
Line Extension Necessity
As a Ranger ascends on its new elevate, the axles transfer additional away from the body. This separation locations elevated pressure on the unique brake traces. With out enough slack, these traces change into taut, subjected to relentless stress with each flex of the suspension. The danger of rupture will increase dramatically, probably main to finish brake failure. Prolonged brake traces change into an absolute necessity, offering the required size to accommodate the elevated journey.
-
Materials Degradation Danger
Even when the unique brake traces do not instantly snap, the fixed stretching can speed up materials degradation. The rubber or braided metal development weakens over time, changing into more and more weak to leaks and failures. Inspecting the traces often turns into paramount. Changing them with longer, extra sturdy traces designed for lifted purposes is usually the wisest plan of action, making certain long-term reliability.
-
Routing Issues
Merely including longer traces is just not sufficient. The routing of those traces turns into equally important. They should be rigorously positioned to keep away from contact with suspension elements, the body, or the tires. Chafing towards these surfaces can rapidly put on by means of the traces, resulting in leaks and potential brake failure. Securing the traces with acceptable clips and brackets ensures they continue to be safely out of hurt’s manner, defending their integrity.
-
Bleeding the System
After putting in prolonged brake traces, bleeding the braking system turns into important. Air trapped throughout the traces can compress, lowering braking effectiveness. An intensive bleeding course of removes this air, restoring agency pedal really feel and making certain optimum braking efficiency. Neglecting this step can compromise the automobile’s stopping energy, rising the danger of accidents.
These seemingly small traces play an outsized position within the security of a lifted 1999 Ford Ranger. Ignoring the necessity for satisfactory brake line size is akin to enjoying a harmful recreation, risking not solely the automobile’s integrity but additionally the well-being of its occupants. Addressing this often-overlooked element is a important step in remodeling a modified truck from a possible hazard right into a dependable and succesful machine. The size of the brake line is a crucial part to contemplate for automobile security.
5. Steering Linkages
The narrative of a lifted 1999 Ford Ranger usually pivots on a important, but continuously underestimated factor: the steering linkages. These mechanical elements, the sinews connecting the steering wheel to the wheels themselves, change into significantly essential when a elevate equipment is launched. The act of elevating the automobile alters the geometry of the whole steering system, probably compromising its precision and responsiveness. A failure to correctly deal with these modifications can rework a seemingly helpful modification right into a dealing with nightmare, jeopardizing the security and drivability of the truck.
-
Pitman Arm and Loafer Arm Points
The Pitman arm and loafer arm, essential elements in lots of Ranger steering methods, are straight affected by a elevate. The elevated angles ensuing from the elevate could cause these arms to bind or function exterior their designed vary, resulting in imprecise steering and elevated put on. A typical resolution includes putting in drop Pitman and loafer arms, which appropriate the angles and restore correct steering geometry. The absence of those corrections usually leads to a wandering steering really feel, making it tough to keep up a straight line, particularly at freeway speeds.
-
Tie Rod Angle Considerations
Tie rods, connecting the steering knuckle to the steering heart hyperlink, are additionally weak to the results of a elevate. Elevated angles can result in bump steer, a phenomenon the place the wheels steer themselves over bumps or uneven surfaces. Adjustable tie rod ends, and even full steering linkage replacements, could also be essential to attenuate bump steer and keep predictable dealing with. Ignoring this side can lead to a disconcerting and probably harmful driving expertise.
-
Steering Shaft Extension
In some circumstances, the steering shaft, connecting the steering wheel to the steering field, might require extension after putting in a elevate. The elevated distance between the physique and the chassis could cause the shaft to bind and even disconnect, main to a whole lack of steering management. A correctly prolonged steering shaft ensures easy and dependable steering operation all through the total vary of suspension journey. Neglecting this side can have catastrophic penalties.
-
Alignment Sensitivity Amplification
Even minor alignment points are amplified after a elevate. Modifications in journey top have an effect on caster, camber, and toe, all of which have a direct affect on steering really feel and tire put on. A exact alignment, carried out by a certified technician, is important to optimize dealing with and forestall untimely tire put on. Skimping on the alignment can negate lots of the advantages of the elevate, leading to a truck that’s each uncomfortable and costly to function.
The mixing of a elevate equipment with a 1999 Ford Ranger is just not merely a matter of bolting on new elements. It necessitates a complete understanding of how these modifications affect the steering linkages. Addressing potential points with the Pitman arm, loafer arm, tie rods, and steering shaft, coupled with a exact alignment, is important for sustaining protected and predictable dealing with. Failing to take action transforms a possible improve into a big legal responsibility, undermining the very goal of the modification.
6. Shock Absorbers
The saga of a 1999 Ford Ranger elevated by a elevate equipment inevitably results in the very important position of shock absorbers. These unsung heroes of the suspension system are greater than mere elements; they’re the arbiters of consolation, management, and stability. A elevate equipment basically alters the dynamics of the suspension, stretching the unique shocks past their meant vary, rendering them insufficient for the duty. The choice of acceptable shock absorbers turns into not only a suggestion, however a necessity for preserving the automobile’s dealing with traits.
Think about a Ranger proprietor who, enthralled by the improved look of his lifted truck, neglects the significance of upgrading the shock absorbers. Initially, the elevated floor clearance looks as if a triumph. Nevertheless, on the primary bumpy street, the truck’s journey turns into jarring, the suspension bouncing uncontrollably after every affect. This lack of damping management not solely diminishes the driving expertise but additionally compromises security, significantly throughout emergency maneuvers. The unique shocks, designed for a decrease journey top, merely can not address the elevated journey and altered leverage of the lifted suspension. Changing these with longer, extra sturdy shocks designed for lifted purposes restores a semblance of normalcy, mitigating the harshness and enhancing general dealing with.
In essence, the connection between shock absorbers and a elevate equipment for a 1999 Ford Ranger is one among trigger and impact. The elevate equipment alters the suspension geometry, necessitating the usage of acceptable shock absorbers to keep up journey high quality and dealing with. Ignoring this connection transforms a probably helpful modification right into a detriment, compromising the automobile’s efficiency and security. Due to this fact, cautious choice and set up of shock absorbers is an important step in making certain the success of any elevate equipment set up.
7. Set up Complexity
The set up complexity surrounding a modification on a 1999 Ford Ranger is a story of ability, assets, and potential pitfalls. It is a story usually underestimated, remodeling a seemingly simple improve right into a difficult endeavor. The extent of issue is extremely variable, depending on the kind of modification chosen, the instruments accessible, and the mechanical aptitude of the installer. The set up complexity is among the most essential determination for this automobile.
-
Element Disassembly and Reassembly
Many elevate kits require the disassembly of current suspension elements, a course of that may be deceptively intricate. Spring compressors, specialised wrenches, and penetrating oils change into important allies. A corroded bolt, stubbornly refusing to yield, can carry progress to a grinding halt. The reassembly course of, equally demanding, necessitates exact torque specs and cautious alignment to make sure correct performance. Improper reassembly can result in untimely put on, dealing with points, and even part failure.
-
Modification or Fabrication
Sure installations demand extra than simply bolting on pre-fabricated elements. Some kits require modification of current automobile elements, comparable to trimming the wheel wells or relocating brake traces. Others might necessitate fabrication of customized brackets or mounts to make sure correct fitment. These duties demand welding expertise, slicing instruments, and a radical understanding of automotive engineering ideas. Trying these modifications with out the required expertise and tools can lead to substandard workmanship and compromised security.
-
Specialised Instruments and Gear
A primary socket set and a wrench will solely get one to this point within the realm of suspension modifications. Many duties require specialised instruments, comparable to ball joint presses, spring compressors, and torque wrenches. Entry to a elevate can considerably ease the set up course of, offering ample room to maneuver and stopping again pressure. Investing in these instruments, or in search of the help of a store that possesses them, can considerably cut back the set up complexity and enhance the standard of the work.
-
Potential for Surprising Points
Even with meticulous planning and preparation, sudden points usually come up throughout the set up course of. A damaged bolt, a mislabeled half, or an incompatibility between the equipment and the automobile can throw a wrench into the works. Diagnosing and resolving these points usually requires endurance, resourcefulness, and a radical understanding of automotive methods. A willingness to improvise and adapt is important for navigating these unexpected challenges.
The attract of elevated floor clearance and a extra aggressive stance usually overshadows the realities of set up complexity. An intensive evaluation of 1’s expertise, assets, and the precise necessities of the elevate equipment is important earlier than embarking on such a venture. Recognizing the potential pitfalls and getting ready accordingly can rework a frightening job right into a rewarding accomplishment, making certain that the improved look of the 1999 Ford Ranger is matched by a protected and dependable efficiency.
Regularly Requested Questions
These inquiries symbolize the fruits of numerous late-night storage periods, whispered conversations amongst seasoned mechanics, and cautionary tales handed down by means of generations of pickup truck lovers. They encapsulate probably the most urgent issues and demanding issues surrounding this intricate modification.
Query 1: Will elevating the automobile trigger the body to rust?
The specter of corrosion looms massive within the minds of these considering altering the suspension of this specific mannequin yr pickup. Whereas a elevate, in and of itself, doesn’t straight instigate rust, it could actually exacerbate current vulnerabilities. Exposing beforehand shielded areas to the weather, mixed with the inevitable scratches and abrasions incurred throughout the set up course of, can speed up the oxidation course of. Thorough inspection and preventative measures, comparable to rust-inhibiting coatings, are paramount to preserving the structural integrity of the body. A proactive method can mitigate the danger and make sure the longevity of the automobile.
Query 2: Is it doable to revert to the unique suspension if the elevate equipment is just not passable?
The trail of modification is just not all the time a one-way road, however retracing steps can show difficult. Reverting to the unique suspension is technically possible, but it surely requires cautious planning and meticulous execution. The unique elements should be retained and saved correctly, and the reinstallation course of calls for the identical stage of precision because the preliminary modification. Moreover, the act of lifting the automobile might have launched unexpected put on or harm to surrounding elements, necessitating extra repairs throughout the reversion course of. Whereas doable, returning to the inventory configuration is a posh endeavor, to not be taken calmly.
Query 3: How does altering the suspension affect the automobile’s conduct in a collision?
The implications of a suspension modification on crash dynamics are a critical matter, demanding cautious consideration. Elevating the automobile alters its heart of gravity, probably affecting its stability and rising the danger of rollover in a collision. Moreover, the modified suspension elements might not behave in the identical method as the unique tools throughout affect, probably compromising the effectiveness of the automobile’s security methods. Whereas the total extent of those results is tough to quantify with out intensive testing, it’s crucial to acknowledge the potential dangers and drive accordingly.
Query 4: Does putting in such kits void the manufacturing unit guarantee?
The shadow of guarantee implications looms massive when considering any important automobile modification. Whereas a blanket assertion is inconceivable, it’s typically accepted that putting in a elevate equipment can certainly void parts of the manufacturing unit guarantee, significantly these associated to the suspension, drivetrain, and steering methods. The extent of the voidance is determined by the precise phrases of the guarantee and the character of the modification. Consulting with a certified mechanic or the automobile producer is essential to understanding the potential penalties earlier than continuing with the set up.
Query 5: Can such kits enhance gas financial system?
The pursuit of improved gas effectivity is a standard aspiration, however anticipating it as a byproduct of is usually misplaced. In actuality, the other is way extra seemingly. The elevated journey top, bigger tires, and altered aerodynamics related to a elevate equipment usually end in a lower in gas financial system. The added weight, elevated wind resistance, and altered gear ratios conspire to scale back the automobile’s effectivity. Whereas minor enhancements could also be doable with cautious tire choice and driving habits, a big enhance in gas financial system is extremely unbelievable.
Query 6: Will this have an effect on insurance coverage premiums?
The monetary implications prolong past the preliminary value of the equipment and its set up. Modifying a automobile usually has a ripple impact on insurance coverage premiums. Insurance coverage firms assess danger primarily based on numerous components, together with the automobile’s security report and the chance of accidents. A lifted automobile, with its altered dealing with traits and elevated potential for harm, could also be deemed the next danger, leading to elevated premiums. Contacting one’s insurance coverage supplier is essential to understanding the potential monetary affect earlier than continuing with the modification.
These queries function a stark reminder of the multifaceted nature of car modification. It is essential to method it with information, deliberation, and a wholesome dose of warning. The end result ought to improve the automobile, however not on the expense of security, reliability, or monetary stability.
Subsequent, the article will delve into particular manufacturers and fashions, offering a comparative evaluation of their options, advantages, and potential drawbacks.
Important Directives for a ’99 Ranger
Tales from the storage, etched in grease and hardened classes, reveal truths about modifying a ’99 Ranger. These directives, gleaned from numerous tasks, stand as a testomony to planning, precision, and a wholesome respect for automotive engineering.
Tip 1: Seek the advice of the Oracle of Boards. Previous to wrenching, delve into the depths of on-line boards devoted to this specific mannequin yr. These digital repositories maintain a wealth of collective information, revealing widespread pitfalls, efficient options, and invaluable insights from those that have walked this path earlier than. This collective knowledge serves as an important compass, guiding one by means of the complexities of the method.
Tip 2: Scrutinize the Sum of All Components. Past the attract of an entire meeting, meticulously look at every particular person part for compatibility and high quality. A single substandard half can compromise the whole system, resulting in untimely put on, dealing with points, and probably harmful conditions. Respected manufacturers, identified for his or her engineering and sturdiness, are definitely worth the funding, making certain long-term reliability.
Tip 3: Invoke the Spirit of Measurement. Earlier than committing to any modification, measure, after which measure once more. Correct measurements are paramount for making certain correct fitment, avoiding clearance points, and sustaining appropriate suspension geometry. Neglecting this important step can lead to pricey errors and irritating setbacks. Precision is the cornerstone of a profitable venture.
Tip 4: Heed the Warnings of Torque. The standard torque wrench is just not merely a instrument; it’s a guardian of mechanical integrity. Overtightening can strip threads and weaken elements, whereas undertightening can result in loosening and failure. Adhering to the producer’s specified torque values is important for making certain the protected and dependable operation of the modified suspension. Respect the torque specs; they don’t seem to be mere strategies.
Tip 5: Embrace the Self-discipline of Documentation. Earlier than disassembling something, doc the unique configuration with images and detailed notes. This report serves as a useful reference throughout reassembly, stopping confusion and making certain that every little thing is returned to its correct place. Moreover, meticulously doc every step of the set up course of, noting any modifications or deviations from the directions. This documentation proves invaluable for future upkeep and troubleshooting.
Tip 6: Search the Steerage of Skilled Arms. Whereas self-reliance is admirable, complicated modifications usually profit from the experience of a seasoned mechanic. Consulting with a certified skilled can present invaluable insights, establish potential issues, and make sure that the set up is carried out accurately and safely. Don’t hesitate to hunt help when wanted; delight ought to by no means compromise security.
Tip 7: Respect the Finite Nature of Time. Enterprise is just not a race; it’s a journey. Dashing the method can result in errors and oversights, compromising the standard of the work and probably jeopardizing security. Allocate enough time for every step, permitting for unexpected delays and sudden challenges. Endurance and diligence are important for a profitable final result.
These directives, cast within the crucible of expertise, function a guiding gentle for these embarking on this endeavor. By embracing these ideas, one can rework a ’99 Ranger right into a personalized machine that’s each succesful and dependable.
The following part transitions to a dialogue of potential long-term results, inspecting the affect of those modifications on the automobile’s general lifespan and worth.
The Finish of the Path for the 1999 Ford Ranger
The previous exploration of the modification on a 1999 Ford Ranger has illuminated a path fraught with each promise and peril. From the preliminary attract of enhanced functionality and aesthetics to the intricate issues of suspension geometry, driveline angles, and set up complexity, this endeavor reveals itself as a much more nuanced endeavor than a easy bolt-on improve. The tales of triumph and tribulation shared by those that have traversed this terrain function a stark reminder of the necessity for meticulous planning, knowledgeable decision-making, and a wholesome respect for the forces at play.
Because the solar units on this specific chapter, take into account this: the choice to raise a 1999 Ford Ranger is just not merely about altering its journey top; it’s about assuming a stewardship, a accountability for making certain its continued security, reliability, and longevity. The journey calls for vigilance, a dedication to ongoing upkeep, and a willingness to adapt to the unexpected challenges that lie forward. Solely then can the potential of the modification be absolutely realized, remodeling a basic pickup right into a testomony to ingenuity and craftsmanship. The path awaits; tread rigorously.
