This element grouping is particularly designed to be used with the Polaris RZR 1000 XP side-by-side automobile. It includes components meant to optimize the switch of energy from the engine to the wheels through the automobile’s transmission. Functionally, it permits for changes to the engagement traits and general efficiency of the automobile’s drivetrain.
Using this explicit meeting can yield advantages resembling improved acceleration, enhanced throttle response, and optimized belt life. Traditionally, such aftermarket options have arisen to handle limitations in factory-installed methods, tailoring efficiency to particular driving kinds and terrains. Putting in this aftermarket system helps fantastic tune the machine to a specific riders wants.
Subsequent sections will delve into the particular elements inside these efficiency packages, discover concerns for choosing an applicable choice, and handle set up and upkeep facets.
1. Acceleration
Within the realm of off-road automobiles, the pursuit of speedy acceleration is commonly paramount. That is the place the strategic utility of a specialised set of drivetrain elements turns into related. An ordinary RZR 1000 XP, whereas succesful, might exhibit limitations in its preliminary energy supply. The manufacturing facility setup is often calibrated for a compromise between various working situations, doubtlessly sacrificing optimum acceleration in particular situations, resembling dune driving or short-track racing.
The importance of this element meeting lies in its means to re-profile the ability curve. By modifying the engagement traits, the automobile can extra effectively switch engine torque to the wheels from a standstill or low speeds. This interprets immediately into faster acceleration occasions and a extra responsive really feel. Think about, as an illustration, two equivalent RZR 1000 XPs lining up for a drag race. The one outfitted with a well-chosen aftermarket system is prone to acquire a major benefit within the preliminary meters, doubtlessly securing victory. The sensible significance right here stems from this gained fringe of management.
In the end, the connection between enhanced acceleration and a well-specified set of elements is one in every of optimization. It permits a driver to refine their RZR 1000 XP’s efficiency profile, catering to particular wants and maximizing its potential in demanding environments. The problem lies in rigorously choosing an applicable equipment that aligns with the meant use and driving fashion, guaranteeing that the features in acceleration are balanced with different efficiency components resembling high velocity and belt longevity.
2. Backshifting
The descent started regularly, a mild slope inviting momentum. However the terrain tightened, rocks jutted, and the grade steepened. With out correct backshifting, the RZR 1000 XP would have develop into a runaway sledge, its engine wailing a powerless protest. Backshifting, the drivetrain’s means to quickly downshift as engine velocity decreases, is a important safeguard, a mechanism to take care of management and stop catastrophe. That is the place the capabilities of a thoughtfully designed element meeting manifest within the type of tangible security and confidence.
Think about, for instance, a state of affairs on a winding mountain path. The motive force crests a ridge, anticipates a pointy flip, and lifts off the throttle. With a typical setup, the engine velocity would possibly drop too rapidly, disengaging the drivetrain and leaving the automobile to rely solely on its brakes. An aftermarket equipment, nonetheless, will be calibrated to take care of a better engagement velocity, offering rapid engine braking as the motive force releases the accelerator. The RZR now responds with managed deceleration, permitting for exact cornering and avoiding a doubtlessly harmful state of affairs. The worth of this energetic engine braking in dicey conditions will be great.
The combination of backshifting traits right into a tailor-made system will not be merely about efficiency enhancement; it’s about instilling confidence within the driver. It’s the assurance that the automobile will reply predictably in difficult circumstances. The collection of particular weights and is derived dictates exactly when and the way aggressively the drivetrain engages throughout deceleration. Cautious calibration ensures not solely enhanced management but in addition prevents untimely put on on brake elements, extending the automobile’s operational lifespan. Correct backshifting makes the driving expertise extra pleasurable and extra protected.
3. Belt lifespan
The serpentine belt, a seemingly unassuming element, is the lifeline between the engine’s uncooked energy and the drivetrain’s means to translate it into movement. Its fragility, nonetheless, is a well known Achilles’ heel within the RZR 1000 XP platform. Untimely belt failure will not be merely an inconvenience; it represents a monetary burden and a possible security hazard, stranding the automobile and its occupants in unforgiving terrain. The connection between this important element and the efficiency tuning package deal is essential to the sturdiness and reliability of the automobile.
-
Warmth Era and Dissipation
Extreme warmth is the first enemy of belt longevity. Slippage, typically a consequence of mismatched engagement traits, generates great friction, inflicting the belt to overheat and degrade quickly. A well-calibrated aftermarket system optimizes engagement, minimizing slippage and, consequently, warmth build-up. Think about a desert race; the RZR outfitted with an improperly tuned meeting struggles, its belt glowing pink scorching, in the end succumbing to catastrophic failure. In distinction, the machine with a thoughtfully chosen system maintains a cooler working temperature, its belt enduring the grueling situations. The power to dissipate warmth is the final word key to longevity.
-
Clutch Alignment and Stability
Misalignment between the first and secondary sheaves can induce uneven put on and tear, accelerating belt deterioration. Equally, imbalance throughout the rotating elements creates vibrations that stress the belt fibers. An aftermarket system typically addresses these points by providing precision-engineered elements and shims, guaranteeing excellent alignment and steadiness. The distinction between the automobiles is obvious as an aligned system runs easily and would not stress the belt as a result of improper alignment.
-
Engagement Profile and Shift Traits
An aggressive engagement profile, whereas delivering exhilarating acceleration, can shock the belt, inflicting untimely put on. Conversely, a sluggish engagement can result in extended slippage and warmth build-up. A rigorously chosen aftermarket system permits for personalization of the engagement profile and shift traits, placing a steadiness between efficiency and belt longevity. The best system may lengthen belt lifespan.
-
Belt Materials and Development
The standard of the belt itself performs a major position in its lifespan. Aftermarket choices typically make the most of bolstered supplies and superior building methods, enhancing their resistance to warmth, stretching, and abrasion. A manufacturing facility belt would possibly succumb to the stresses of aggressive driving, whereas an upgraded belt, designed to resist excessive situations, can present considerably prolonged service life. Deciding on the right belt based mostly in your wants makes all of the distinction.
The pursuit of elevated belt lifespan will not be merely about value financial savings; it’s about reliability and peace of thoughts. A RZR 1000 XP, outfitted with a meticulously chosen and correctly put in system, transforms from a possible legal responsibility right into a reliable workhorse, able to tackling essentially the most demanding terrains with out concern of catastrophic belt failure. The cautious choice course of is an funding within the automobile’s efficiency, reliability, and, in the end, the motive force’s enjoyment.
4. Terrain Adaptability
The panorama unfurls dunes ripple underneath the relentless solar, jagged rocks guard precipitous climbs, and muddy trails swallow tires entire. A inventory RZR 1000 XP, competent on diversified surfaces, might however reveal its limitations when confronted with actually demanding or extremely specialised terrain. The manufacturing facility calibration, a compromise meant to swimsuit a variety of situations, typically falls wanting delivering optimum efficiency in any single setting. The power to tailor the automobile’s energy supply to the particular calls for of the terrain turns into paramount, shifting the main focus from mere traversal to masterful management.
Think about the state of affairs of a RZR navigating a sand dune. A machine configured for hard-packed trails struggles, its wheels churning uselessly, burying itself deeper with every rotation. An appropriately chosen and put in drivetrain modification, nonetheless, transforms its habits. Modified engagement traits permit the engine to function inside its optimum energy band, delivering the mandatory torque to the wheels with out extreme slippage. The RZR claws its approach up the dune face, a testomony to the transformative energy of terrain-specific tuning. This adaptability extends past dunes to embody rock crawling, mud bogging, and high-altitude trails. Every setting presents a singular set of calls for, and a flexible system permits the motive force to dial within the exact response required to beat the problem.
In essence, the mixing of terrain adaptability into the choice strategy of efficiency enhancement elements represents a shift from a generic answer to a specialised software. The outcome will not be merely a quicker or extra highly effective RZR, however a automobile able to responding intelligently to the ever-changing calls for of the terrain. The considerate choice course of interprets immediately into enhanced management, improved effectivity, and an elevated driving expertise. The challenges inherent in choosing the suitable elements stem from the necessity to precisely assess the particular terrain situations and to know the interaction between varied drivetrain elements. However the rewards the flexibility to confidently deal with any terrain are effectively definitely worth the effort.
5. Engine braking
A steep descent started within the mountain. The RZR 1000 XP, beforehand keen on the ascent, now confronted a distinct sort of take a look at. Engine braking, the utilization of the engine’s resistance to gradual the automobile, turned paramount. A inventory machine, in such a state of affairs, would possibly exhibit a disconnect, some extent the place the drivetrain disengages, leaving the brakes as the only real technique of management. The potential for brake fade, and even full lack of management, loomed massive. Nevertheless, a efficiency enhancing setup transforms this dynamic, providing a level of management and security beforehand absent.
The core connection lies within the setup’s means to take care of engagement at decrease speeds. The springs and weights, exactly calibrated, dictate when the secondary sheave applies strain to the belt, stopping it from slipping and disengaging from the first. This interprets into engine braking that isn’t abrupt or jerky however clean and predictable. Think about a rock crawling state of affairs: every impediment requires cautious negotiation. The power to use engine braking permits a driver to creep over boulders, utilizing the engine’s resistance to manage velocity and stop sudden drops. A inventory setup would require fixed brake modulation, rising the chance of stalling or shedding traction. With an enhanced meeting, the motive force features a extra nuanced degree of management, making the machine an extension of their will, exactly maneuvering over the terrain.
The combination of engine braking capabilities extends past security, influencing efficiency. The rigorously chosen system permits for earlier and extra managed deceleration into corners, organising for faster exits. The motive force can belief the automobile to reply predictably, carrying extra velocity via turns and sustaining momentum. The collection of elements, due to this fact, will not be merely about rising horsepower; it’s about enhancing management, enhancing security, and in the end unlocking the complete potential of the RZR 1000 XP in demanding environments. The interaction between engine braking and the correct setup is an important, typically missed, side of off-road efficiency.
6. Element sturdiness
The story of the RZR 1000 XP pushed throughout the unforgiving Mojave Desert underscores a basic fact: even essentially the most meticulously engineered machine is in the end restricted by the resilience of its constituent components. Amongst these, the meeting tasked with transmitting energy from the engine to the wheels stands as a important juncture. It’s right here, throughout the coronary heart of the drivetrain, that the pursuit of enhanced efficiency should be tempered by an unwavering dedication to element sturdiness. The story typically unfolds in two starkly contrasting narratives: one in every of fleeting features and untimely failure, the opposite of sustained efficiency and enduring reliability. The collection of an enhanced answer, due to this fact, transcends mere horsepower figures, demanding cautious consideration of supplies, design, and manufacturing processes.
Think about, as an illustration, two equivalent RZRs embarking on the identical grueling race. One, outfitted with a budget-oriented aftermarket equipment, guarantees spectacular features in acceleration and high velocity. Nevertheless, its elements, crafted from substandard supplies, succumb to the relentless warmth and stress. The weights, vulnerable to deformation, shift unpredictably, throwing the system out of steadiness. The springs, missing the mandatory tensile energy, fatigue prematurely, resulting in inconsistent engagement. The narrative culminates in a DNF, the machine sidelined by a catastrophic failure. The opposite RZR, nonetheless, tells a distinct story. Its system, constructed with high-strength alloys and subjected to rigorous testing, endures the race unscathed. The belt, bolstered with aramid fibers, resists stretching and cracking. The sheaves, precision-machined and balanced, preserve excellent alignment. The outcome will not be solely a end however a testomony to the enduring worth of element sturdiness. This narrative is a lesson to be realized.
The interaction between efficiency and longevity is a fragile balancing act. The search for elevated horsepower ought to by no means come on the expense of reliability. An understanding of the supplies science, engineering rules, and manufacturing processes that underpin element sturdiness is crucial for making knowledgeable selections. The selection of a efficiency improve will not be merely a purchase order; it’s an funding within the long-term well being and efficiency of the machine. It’s a dedication to making sure that the tales instructed within the dunes, on the paths, and within the races should not tales of untimely failure, however relatively accounts of putting up with efficiency and unwavering reliability.
7. Warmth discount
The desert solar beat down relentlessly, turning the sand right into a shimmering mirage. Beneath the RZR 1000 XP’s hood, a distinct sort of warmth was constructing, the type that may cripple efficiency and result in catastrophic failure. The clutch, tasked with transferring the engine’s energy, was working extra time, producing friction, and with it, warmth. Within the unforgiving crucible of off-road efficiency, warmth discount is not merely a fascinating function; it is a prerequisite for survival. The clutch system is pivotal to holding temps down.
-
Optimized Engagement Profile
The engagement profile determines how easily and effectively energy is transferred. An aggressive or poorly tuned system induces slippage, the first catalyst for warmth technology. A efficiency enhancing meeting with an optimized engagement profile minimizes slippage, permitting the belt to grip correctly and decreasing the friction that results in extreme temperatures. Think about two RZRs tackling a steep dune climb: one with a inventory system, struggling and slipping, its clutch glowing pink scorching; the opposite, with a meticulously calibrated system, gliding effortlessly, its clutch remaining cool to the contact. The distinction lies within the means to harness energy with out producing extreme warmth.
-
Enhanced Airflow and Air flow
The clutch housing turns into an oven. Correct air flow is crucial to dissipate the warmth generated inside. Some aftermarket kits incorporate modified clutch covers or vents designed to extend airflow, drawing cool air in and expelling scorching air out. With out sufficient air flow, the clutch elements will inevitably overheat, resulting in belt failure and diminished efficiency. Visualize a closed oven versus an open one. The open one all the time releases warmth, which has similarities to the improved air flow system.
-
Element Materials and Design
The supplies used within the building of the clutch elements considerably influence their means to resist and dissipate warmth. Excessive-quality alloys with glorious thermal conductivity can successfully switch warmth away from important areas, stopping localized hotspots. Equally, design options resembling finned sheaves can enhance floor space, selling quicker cooling. Cheaper elements can deform and begin to put on down prematurely. This causes extra warmth.
-
Belt Stress and Alignment
Improper belt rigidity and alignment contribute to warmth technology by inflicting the belt to rub in opposition to the sheaves or to slide underneath load. The improved arrange contains shims and adjustment mechanisms that permit for exact belt alignment and tensioning, minimizing friction and warmth buildup. Think about a wonderfully aligned set of gears versus a misaligned one; the misaligned gears will generate extra warmth and put on down quicker.
The battle in opposition to warmth is an ongoing endeavor, a continuing balancing act between efficiency and reliability. The rigorously chosen efficiency meeting will not be a magic bullet, nevertheless it’s a strategic weapon on this combat, a way of holding the RZR 1000 XP working cool and robust, even when pushed to its limits. The last word aim will not be merely to cut back warmth however to unlock the complete potential of the machine, guaranteeing that it might face up to the trials of off-road driving with out succumbing to the ravages of thermal stress. The improved unit is designed to just do that.
8. Energy Switch
Within the coronary heart of the RZR 1000 XP, the place uncooked horsepower meets the rugged terrain, lies the pivotal act of energy switch. This isn’t merely a mechanical course of; it’s the very essence of the machine’s functionality, the bridge between potential and efficiency. The effectiveness of this switch, the seamlessness with which the engine’s fury is translated into ahead movement, hinges immediately upon the situation and configuration of its drivetrain, notably elements engineered for the automobile. The narrative of the RZR’s energy switch is a story of optimization, a continuing striving to reduce loss and maximize influence. An rzr 1000 xp clutch equipment will help in enhancing this effectivity.
-
Engagement Effectivity
Engagement is the preliminary handshake between engine and drivetrain. A sluggish or improperly tuned system squanders power within the type of warmth and slippage. A exactly calibrated meeting ensures that the engine’s energy is engaged swiftly and effectively, minimizing wasted power and maximizing preliminary thrust. Think about two RZRs launching side-by-side: the one with the optimized engagement leaps forward, a testomony to the ability of environment friendly switch.
-
Torque Multiplication
Torque is the pressure that overcomes resistance, the muscle that propels the RZR over obstacles and up steep inclines. The drivetrain acts as a torque multiplier, leveraging the engine’s output to generate the mandatory pressure to beat difficult terrain. An aftermarket system can improve this multiplication, permitting the RZR to deal with even essentially the most daunting obstacles with ease. For instance, a bigger tire wants extra torque. The clutch equipment will help right here.
-
Shift Response and Management
The drivetrain’s means to reply rapidly and predictably to altering situations is crucial for sustaining management and maximizing efficiency. A sluggish or unpredictable system can result in jerky acceleration, delayed response, and a lack of confidence. A performance-tuned unit supplies crisp, exact shifts, permitting the motive force to take care of management and optimize energy supply in all conditions. Predictability interprets to manage.
-
Drivetrain Inertia
Drivetrain inertia, the resistance to modifications in velocity, can rob the RZR of priceless horsepower. A lighter meeting reduces this inertia, permitting the engine to rev extra freely and speed up extra rapidly. This seemingly small enchancment interprets into noticeable features in general efficiency, particularly in conditions that demand speedy acceleration and deceleration. Additionally, you’d wish to search for a lighter flywheel in case your machine has one.
The story of energy switch within the RZR 1000 XP is a testomony to the transformative potential of cautious engineering and exact calibration. The right system is greater than only a assortment of elements; it’s a symphony of mechanical concord, a rigorously orchestrated dance between engine and drivetrain. The result’s a machine that responds immediately, delivers energy seamlessly, and conquers terrain with unwavering confidence. It isn’t nearly having energy; it is about harnessing it, directing it, and unleashing it with most effectivity.
Regularly Requested Questions
Navigating the world of efficiency enhancements can really feel like traversing a technical minefield. These often requested questions handle frequent considerations and misconceptions surrounding using aftermarket efficiency assemblies within the Polaris RZR 1000 XP.
Query 1: Will putting in an aftermarket efficiency meeting routinely assure a major enhance in high velocity?
The notion that merely bolting on a brand new set of elements will unlock untold reserves of top-end velocity is a typical false impression. The reality is extra nuanced. Whereas some aftermarket methods might contribute to a better terminal velocity, the first focus is commonly on optimizing acceleration, throttle response, and general energy supply throughout the RPM vary. Chasing high velocity alone can result in compromises in different important efficiency areas. Think about a desert racer sacrificing low-end torque for a marginal enhance in high velocity solely to search out themselves struggling to climb dunes and navigate technical sections. A balanced method is essential.
Query 2: Can an aftermarket efficiency meeting compensate for a worn or broken engine?
Ailing engines typically current with diminished energy output, irregular operation, and an general lack of enthusiasm. The expectation {that a} contemporary unit of elements can magically restore misplaced efficiency is usually misplaced. Whereas the right system can definitely optimize energy supply from an engine in good situation, it can not compensate for basic mechanical deficiencies. Think about the analogy of a race automobile: a talented driver can solely extract a lot efficiency from a automobile with a damaged engine.
Query 3: Is it doable to put in a efficiency equipment with none prior mechanical expertise?
The attract of hands-on modification is plain. Nevertheless, the set up of a drivetrain optimization elements will not be a activity for the faint of coronary heart or the mechanically uninitiated. The method typically entails specialised instruments, exact measurements, and an intensive understanding of drivetrain mechanics. Trying an set up with out the mandatory experience can result in element harm, improper perform, and doubtlessly harmful working situations. Image a novice mechanic, armed with solely a socket set and a YouTube video, trying to disassemble a fancy engine element. The result is never favorable.
Query 4: How often ought to a efficiency unit be inspected and maintained?
The lifespan of a performance-optimized drivetrain is immediately proportional to the diligence of its upkeep schedule. Neglecting common inspections and upkeep can result in untimely put on, element failure, and a major discount in general efficiency. The intervals for inspection and upkeep range relying on driving situations and the particular elements used. Consider it like proudly owning a high-performance sports activities automobile: common servicing is crucial to holding it working at its peak.
Query 5: Are all efficiency methods created equal, and does worth all the time mirror high quality?
{The marketplace} affords an unlimited array of items, starting from budget-friendly choices to high-end, race-proven methods. The idea that every one methods ship comparable efficiency or that worth is all the time indicative of high quality is a harmful oversimplification. Components resembling materials high quality, design sophistication, and manufacturing precision all contribute to the general worth and efficiency of the efficiency unit. Analysis and due diligence are important to creating an knowledgeable determination. Simply because one thing is dear, doesn’t make it good.
Query 6: Can a poorly chosen or improperly put in efficiency meeting harm the RZR’s transmission or different drivetrain elements?
The drivetrain is a fancy and interconnected system, the place the actions of 1 element can have cascading results on others. A poorly chosen or improperly put in efficiency system can introduce stress and pressure on different drivetrain elements, doubtlessly resulting in untimely put on, harm, and even catastrophic failure. Think about a domino impact, the place one failing element triggers a series response that in the end brings down the whole system. Cautious choice and correct set up are essential to preserving the integrity of the whole drivetrain.
These often requested questions present a glimpse into the complexities of this explicit efficiency enhancement. Whereas the promise of elevated efficiency is alluring, a balanced and knowledgeable method is crucial to maximizing the advantages and minimizing the dangers.
The next sections will delve into real-world purposes, set up concerns, and finest practices for sustaining an aftermarket unit.
Knowledgeable Steering
The desert wind whispers tales of shredded belts and diminished energy. To beat these challenges, the understanding of the RZR 1000 XP and its efficiency capabilities requires a deeper dive. The next are confirmed insights gleaned from years of expertise, every a important aspect to bear in mind.
Tip 1: Know Thyself, Know Thy Terrain: Not all driving is created equal. A dune-slashing demon setup will flounder in a technical rock backyard, and a mud bogging monster will overheat on a high-speed desert run. Earlier than even contemplating an aftermarket equipment, truthfully assess the dominant terrain. The proper alternative hinges on this basis. Ignoring this precept invitations frustration and wasted cash.
Tip 2: Search Knowledgeable Counsel: The web is rife with opinions, however expertise trumps conjecture. Seek the advice of with respected efficiency retailers, skilled racers, or seasoned mechanics specializing within the RZR 1000 XP. They possess the firsthand data to information the choice course of and to match elements to the specified driving fashion. Heed their recommendation; its a shortcut via the training curve.
Tip 3: High quality Over Value: The attract of a cut price is powerful, however the drivetrain will not be the place to chop corners. Inferior elements will inevitably fail, typically on the most inopportune second, leaving stranded and pissed off. Spend money on respected manufacturers recognized for his or her high quality supplies, precision engineering, and rigorous testing. The preliminary funding pays dividends in the long term.
Tip 4: Preparation is Paramount: The set up is greater than merely bolting on components. Cleanliness is essential. Guarantee all surfaces are freed from particles earlier than meeting. Use a torque wrench and observe the producer’s specs meticulously. Poor preparation breeds untimely failure and frustration. Taking your time ensures you may have achieved it proper.
Tip 5: Testing and Adjustment: After set up, testing turns into your subsequent precedence. Begin with mild runs to evaluate engagement and shift traits. Word any uncommon noises or vibrations. If essential, make small changes to weights, springs, or shims to fine-tune efficiency. Do not be afraid to experiment, however all the time doc the modifications. Solely by experimenting will you get it tuned on your driving fashion.
Tip 6: Monitor Belt Temperature: Warmth is the nemesis of belt lifespan. Spend money on a belt temperature gauge and maintain a watchful eye on the readings. Extreme warmth signifies slippage, misalignment, or overloading. Handle the foundation trigger promptly to forestall catastrophic belt failure. This straightforward addition can save many complications.
Tip 7: Common Inspection and Upkeep: The drivetrain is a dynamic system topic to fixed stress and put on. Implement a daily inspection schedule to test for worn elements, free fasteners, and indicators of misalignment. Substitute worn components promptly and lubricate shifting elements as wanted. Preventative upkeep is the cornerstone of longevity.
Mastering the efficiency potential of the RZR 1000 XP requires dedication, data, and a willingness to study. The implementation of those professional insights supplies a basis for achievement, unlocking its true capabilities, conquering any terrain and having fun with off-road adventures with confidence.
The following narrative explores the intricacies of set up, frequent pitfalls to keep away from, and superior tuning methods for these looking for the final word in efficiency optimization.
The RZR 1000 XP Clutch Equipment
The journey via the intricacies of the elements meant to optimize drivetrain perform has revealed greater than only a assortment of components. It uncovered a pathway to refine the RZR 1000 XP’s efficiency, enhancing acceleration, backshifting, and belt lifespan, whereas adapting to various terrains and managing warmth. It illuminated the significance of cautious choice, correct set up, and diligent upkeep, emphasizing that true efficiency features are intertwined with reliability and longevity.
The pursuit of enhanced efficiency for the RZR 1000 XP turns into a saga of refinement and an ongoing quest. The system turns into a testomony to the will to extract the machines fullest potential. Its a legacy etched within the sand, mud, and rock of numerous off-road adventures, pushed by a dedication to raise not simply efficiency, however the driving expertise itself. The story by no means actually ends, it regularly unfolds every time the accelerator is pressed, energy is delivered, and new terrain is conquered.
